Toro 03655, Руководство по установке

Страница: 7 / 12

5
Remove the Front Tube and
the Hydraulic Hose
No Parts Required
Procedure
1. Raise the front of the unit and support it on jack stands.
2. Remove the lug nuts securing the wheel assemblies and
remove the wheels.
3. Remove the cap screws and nuts securing the wheel
shields to the front axle flanges (Figure 10).
4. Disconnect the hydraulic tube from the top fitting on
the front left wheel motor and the bottom fitting on
the front right wheel motor (Figure 10).
5. Remove the R-clamps securing the tube to the frame
(Figure 10) and the cable ties securing the brake cables
to the hydraulic tubes.
LH
RH
Figure 10
1. Wheel shields 3. Screw 5. Lock nut
2. Hydraulic tube 4. Hose connection fitting 6. R-clamp
6. Disconnect the left hand hose from the variable pump
and the hydraulic tube (Figure 10). Also, remove the 45
degree fitting from the bottom of the variable pump
(Figure 10).
Note:
The right hand hose can also be removed to
improve clearance for the removal and installation of
the front tube. This is not necessary but can aid in the
installation of this kit.
7