Toro 03655, Руководство по установке

Страница: 2 / 12

Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure Description Qty. Use
RH wheel motor 1
LH wheel motor 1
Hydraulic fitting, 45 degrees 4
Bolt (1/2 x 2-1/4 inch) 8
1
Lockwasher (1/2 inch) 8
Mount the wheel motor assemblies.
Manifold 1
Hydraulic fitting, straight 7
Diagnostic fitting
2
Dust cap 2
Bolt (3/8 x 1-3/4 inches) 3
Lockwasher (3/8 inch) 3
2
Spacer 3
Install the manifold.
3
Hydraulic hose 4 Install the wheel motor hoses.
Hydraulic tube, part no. 108-7624 1
Hydraulic tube, part no. 108-7625 1
Hydraulic tube, part no. 108-7626 1
Bulkhead lock nut 3
Tube clamp halves 2
Cap screw (5/16 x 1-1/2 inches) 1
Flat washer (.344 x .688) 1
4
Lock nut (5/16 inch) 1
Installing the manifold tubes.
5
No parts required
–
Removing the front tube and the
hydraulic hose.
Hydraulic tube, part no. 108-7622 1
Hydraulic tube, part no. 108-7623 1
Hydraulic fitting, 90 degrees 1
Hydraulic hose 1
6
Cable tie 3
Installing the front tubes and the
hydraulic hose.
7
No parts required
–
Checking the hydraulic hoses and tubes.
Decal 2
Decal 110–8869, danger 1
8
Decal 110–8973, CE danger (Europe
only)
1
Installing the decals.
Media and Additional Parts
Description Qty. Use
Installation instructions 1 Use to install the kit
Parts catalog 1 Use to reference part numbers
2