g025356
Figure 3
1.
Setscrew (8 x 25 mm), 2
3.
Washer (8 mm), 4
2.
Control-box bracket
4.
Locknut (8 mm), 2
11.
Fasten the electric control box to the bracket using 4
self-tapping screws (6 x 12 mm).
g025357
Figure 4
1.
Electric control box
2.
Self-tapping screw (6 x 12
mm), 4
12.
Take the umbilical cable assembly and identify the end
with 2 control box connectors. Pass this end of the
cable through the keyhole-shaped hole at the front of
the bracket and secure it with the back nuts provided.
g025358
Figure 5
1.
Umbilical cable assembly
13.
Connect the 2 umbilical cable plugs to the electric
control box, using the large cable tie provided.
14.
Assemble the lift-control block assembly with the
fittings as shown in
and
.
6
5
7
1
2
4
5
4
5
3
1
G025630
g025630
Figure 6
1.
Bonded seal (1/4 inch)
5.
Bonded seal (3/8 inch)
2.
Adapter (1/4 inch male x
1/4 inch male)
6.
Adapter (3/8 inch male x
3/8 inch male)
3.
Plug (1/4 inch male)
7.
Lift manifold
4.
Plug (3/8 inch male)
5
