Toro 02861, Руководство по установке

Страница: 3 / 16

Procedure Description Qty. Use
Actuator bracket 1
Proximity sensor 1
Proximity-sensor bracket 1
Setscrew (6 x 25 mm) 2
Washer (6 mm) 4
Locknut (6 mm)
2
Cap screw (5 x 20 mm) 2
Washer (5 mm) 4
Locknut (5 mm) 2
Spacer 1
Solenoid valve (closed) 1
Line body 1
Bonded seal (3/8 inch)
2
Adapter (1/4 inch female x 3/8 inch
male)
1
Bonded seal (1/4 inch) 1
Hose (1/4 inch x 380 mm), 90° x straight 1
Tee (1/4 inch male x 1/4 inch male x 1/4
inch female)
1
Adapter (1/4 inch male x 1/4 inch male),
1.4 mm orifice
1
Cylinder rod spring pin 1
Bush 1
Washer (10 mm) 1
Valve cylinder 1
Bonded seal (3/4 inch) 1
Adapter (1/4 inch male x 3/4 inch male) 1
Swivel tee (1/4 inch female) 1
Adapter (1/4 inch male x 1/4 inch male),
0.8 mm orifice
1
Hose (1/4 inch x 2.156 m) 1
Adapter (1/4 inch male x 3/8 inch male) 1
Split pin 1
Cable tie 8
2
Hose tie (368 x 4.8 mm) 1
Install the rotary valve cylinder
assembly.
Remote-control box 1
Remote-control bracket 2
Cap screw (8 x 25 mm) 4
Washer (8 mm) 8
Nut (8 mm) 4
3
Locknut (8 mm) 4
Install the remote control box and
brackets.
Important:
Do not discard any components that are removed until the installation has been completed, as some
existing parts will need to be used for installing the kit.
3