If suction remains poor, the HEPA filters needs to be replaced.
See instructions in chapter 6. FILTER CHANGE.
5. DUST STORAGE SYSTEM
The dust extractors are mainly equipped with continuous folding bagging system for
effective dust storage or a regular plastic bag system depending on model. The continuous
bag is a 22 m long plastic tube that will be divided into plastic bags using the zip ties
attached with the machine.
To assemble a new continuous bag:
Release the belt holding the last bag. Remove the holder, put in a new bag & pull out the
inner end upwards. Assemble the holder on to the machine and strap the opening facing
upwards with the belt. Pull down the outside end and close it using a zip tie.
All dust extractors can be used with continuous folding dust bags for single use. Also all
models can be fitted with the continuous bag system.
Only change continuous bag or regular bag after filter cleaning cycle have been completed.
To operate the continuous bag:
6. FILTER CHANGE
Risk of dust dispersion - Use personal safety equipment
Unhealthy dust can be spread during filter change. Accordingly, the user should wear
protective glasses, protective gloves, and a breathing mask conforming to protection class
FFP3.
1.
Assemble the continuous bag, turn on the
machine.
2.
Turn off the machine, the dust will drop down
to the bags.
3.
Use a nylon tie to seal the bag
4.
Cut the bag
WARNING
Remember to switch off the machine and pull the plug out of the outlet before servicing.
Содержание TIV7500
Страница 14: ...TIV7500 380V Electrical diagram ...