Tornado TIV7500, Руководство пользователя

Страница: 4 / 14

3. FUNCTION
The machine is designed for vacuuming and separating dry, non-combustible dust with
an explosion limit value of 0.1mg/m
3
.
The dust extractor is started by the switch.
Press ”ON”, machine start
Press ”OFF”, machine stop
Press “Auto Cleaning”,self cleaning start
Dust-laden air is then sucked through the inlet valve at high speed via the suction hose. The
air is slowed down by the cyclone and coarse dust particles are separated out, partly by
centrifugal force and partly by gravity. Air and finer particles then pass through the double
filter system where separation is made. The machine is designed for filter cleaning by A
uto
Pulsing.
The separated dust accumulates in the cyclone until the machine is switched off, when it
drops through the bottom flap into the plastic bag. The filter cleaning process is not
completed before it is clear that the dust inside the tank has fallen down into the collection
bag. In some extreme cases the adhesive ability of the dust must be broken manually. This
can be done by hitting the dust through the bag or tapping the tank using i.e. a rubber
hammer.
4.INNOVATED AUTO CLEANING SYSTEM
TIV7500 is a fully automatic filter cleaning vacuum, the filter cleaning system is on when
switch on the vacuum, there are 2 cylindrical filters rotate self cleaning, each filter will be
cleaned for 3 seconds, every vibration cleaning cycle is 24 seconds
Notice
！！！
Before connecting the power, please confirm the voltage is consistent with the label on the machine.

Make sure the electric plug and socket are matching

Make sure the hose and inlet are matching

Connect the accessories and hose end
Notice
！！！

Please disconnect the plug when the machine doesn’t work.