Tornado Floorkeeper 20 OB/99120ORB, Руководство по эксплуатации и техническому обслуживанию

Страница: 13 / 32

13
MACHINE PREPARATION
ATTACHING YOUR PAD - ORBITAL HEAD
ATTACHING A PAD TO YOUR ORBITAL PAD DRIVER
The orbital unit can be used for daily cleaning; however it specializes in chemical-free finish removal for
low-cost finish maintenance programs. The following directions show how to prepare the machine for both
applications.
For cleaning, the orbital unit is fit with a rectangular, 20 in (508 mm) x 14 in (356 mm) pad. The head comes
standard with a rectangular pad drive plate with a Mighty-Lok® connection system.
1. To attach the pad, align the front corners of the pad to the front corners of the orbital drive plate and press
to attach.
2. Use the foot pedal to lower the scrub deck down onto the pad ensuring alignment from front-to-back and
side-to-side.
3. When the head is properly set onto the pad, you are ready for cleaning.
For chemical-free finish removal, it requires the addition of a specialized surface preparation pad. The
application still requires the attachment of a traditional cleaning pad first. This pad acts as a “backer pad”
which compensates for low and high spots in the floor.
4. Align the Velcro pad retainer along one length of the red, backer pad and press down. This will leave a 2”
gap along one side of the backer pad. Then place the surface prep pad on top of the pad retainer, centering
it from front-to-back & side-to-side with the red pad. The 2” gap left by the pad retainer needs to be
at the front of the machine so that water can fully saturate the pad . Align your pad assembly with all
corners of the pad driver and press upward. The red backer pad should be in closest contact with the pad
driver.
5.
Finish the operation by using the foot pedal to lower the scrub deck down onto the surface preparation
pad, once again ensuring alignment from front-to-back and side-to-side. When the head is properly set
onto the pad, you are ready for your finish maintenance program.
Proper alignment of
pad
5
Red backer pad &
Velcro pad retainer
(black) alignment
shown above with
surface prep pad
(brown) pulled
away
4
Proper alignment of pad
3
Lower the scrub head using the foot pedal
2
Align the front corners of the pad and
press to adhere
1
Turn unit on using key switch
Position scrub head over pad driver(s)
or brush(es)
Lower the scrub head using the foot pedal
Quickly pulse the activation trigger
1 2 3 4