22
For
more extensive cleaning of the tank,
remove the Top Cover Lid and flush out the
tank with clean water as necessary.
MAINTENANCE
Draining Solution Tank:
1. Locate drain hose at rear of unit and
position over floor drain or container.
2. Pull the corded ball out of position to
expose the hole.
3. Lower the hose and position it over a
drain. Once flow has stopped, replace
the ball to close the tube. Tuck drain
hose back onto its hook.
NOTE:
Flush and clean both tanks after each use, and
allow to air dry to eliminate odors and
corrosion of vacuum motor.
Vacuum Motor
To service vacuum motor (which is mounted to
the underside of the Cover/Recovery Tank):
1. Drain the Recovery Tank and raise it to the
open position.
2. Disconnect wires to the Vacuum Motor,
noting connections for later reattachment.
3. Remove three motor mounting screws.
4. Remove motor and inspect the mounting
gasket carefully before reinstallation.
Replace the gasket if necessary.
https://harrissupplyind.com - To Order Parts Call 608-268-8080
