12
Instructions for use T-1321 e
4.6 Operating Modes
By using the TORMAX user interface
u
it is possible to operate the automatic door system in 6 operat-
ing modes and with status displays or to use a simple operating mode switch
u
to operate the door in
3 operating modes.
Operating Mode OFF
The internal and external sensors are disregarded. The door is maintained in the closed position either
by the motor or the holding magnet
u
and/or locked by the electro-mechanical lock
u
. Access is only
possible using the key switch
u
.
The door can still be used for 5 seconds after selecting operating mode OFF. The door then locks
at the end of this period as soon as it is closed. The transition is signalled on the user interface by the
flashing display of operating mode OFF.
Operating Mode AUTOMATIC 1
The operating mode AUTOMATIC 1 is normally used during the day. The door opens automatically
(normally to its full opening width) to both sides by means of the internal and external sensors.
Operating Mode AUTOMATIC 2
Operating mode AUTOMATIC 2 is normally used during the day. The door opens automatically (nor-
mally with a reduced opening width) to both sides by means of the internal and external sensors.
If required, the hold open time can be set by the installer for a different period to the one used in
AUTOMATIC 1.
Operating Mode EXIT
Operating mode EXIT is normally used for the period before the shop or office closes. The door will
only open automatically when activated by the internal sensor.
When the door opens the external sensor is also monitored for safety reasons.
The opening width is determined by previously selecting operating mode AUTOMATIC 1 or AUTOMATIC
2. The door can be automatically blocked using the holding magnet
u
.
Operating Mode OPEN
The door opens and remains open. The opening width is determined by previously selecting operating
mode AUTOMATIC 1 or AUTOMATIC 2.
Operating Mode Manual Operation
The door leaves can be freely moved. This operating mode can be used for temporarily shutting down
the door. The system is reset after leaving this operating mode.
P
