background image

Instructions for Use iMotion 1302.KI  T-1737 e

    

17

7.2  Check-List for Functional Checks

Item To Be Checked

Procedure

Result

Sensors

T1540_5

•  Walk through the door directly from 

the front and from different directions 
at normal speed, starting both from 
the inside and outside.

The door opens at the right time 
and with sufficient speed so that 
passage through the door Is not 
hindered.

Safety Sensors

T1540_6

•  Walk through the door directly from 

the front and from different directions 
at a slow speed like an infirm person, 
starting both from the inside and out-
side.

The door opens and remains open 
until you are completely through 
the door.

Swing Leaf, Door Frame

T1540_10

•  Check the glass door fillings, door 

edges and rubber profiles for dam-
age.

The door fillings have no sharp 
edges and splintered glass. 
The side parts and the door seals 
are in place and undamaged.

Panic Fitting 

u

T1540_9

•  Isolate the drive from the power supply 

(main system switch, mains plug) or 
select operating mode OFF. Then 
push the door in the direction opposite 
to the opening direction until the panic 
fitting releases the door leaf. Now push 
the door leaf back to the initial position.

The panic fitting can be released 
and returned to the initial position.

Drive, Lever and Hinges

T1737_2

•  Check the noises made while the 

door moves.

No unusual and noticeable noise 
can be heard from the drive, the 
lever or in the region of the hinges. 
No significant wear is visible.

Operating components, lettering and marking

      

  

3

•  Check the function and marking of 

operating controls. Check all lettering 
and marking for their condition.

The operating controls are func-
tioning correctly; the markings are 
visible and legible.

System Vicinity

T1540_7

•  Check access to the door and the 

movement area of the door leaves.

Access to the door is free from 
objects and items likely to cause 
the user to trip. There are no ob-
jects such as shelves, plant con-
tainers and umbrella stands within 
a radius of 50 cm of the movement 
area.

Содержание iMotion 1302.KI





















Отзывы: