1.
Getting Started
Please read these assembly instruction carefully.
Some stand parts and the mill are heavy. Use caution and plan carefully when lifting and moving them.
Wear protecting articles such as work clothes, gloves etc. in order to avoid personal injury or damage to
clothes.
It is best if two people assemble the stand.
Gather all the appropriate tools.
Screw drivers slotted and phillips
Tape measure
Socket set and wrenches
Metric taps and handle
Level
Allen wrenches
Shears
Hammer
Pry bar
Some of the optional equipment for your PCNC 770 mill that are covered in this manual are.
The stand with side chip trays with leak resistant drip channeling (PN 31191)
Coolant kit with reservoir tank, pump, hose and back splash surround (PN 31192)
Machine arm for key board and monitor and tool tray (PN 30286)