10.
Machine Arm
The Machine Arm is a separately purchased accessory that
many machine owners find very useful. Can be mounted on
either the PCNC control cabinet for right hand mounting, or
directly on the cast iron column for left hand mounting as
shown in Figure 24. Machine arm mounted to column.. All
PCNC mills come with mounting holes for either or both
locations.
Figure 25.Shows a machine arm configured for holding a tool
tray. The arm is mounted to the mill column using the 4 bolts,
washers and lock washers provided. For mounting to the
control panel insert a bolt and a small washer through the
mounting bracket and through the hole in the cabinet. Use the
large fender washer, small washer, lock washer and nut on the
inside of the cabinet.
Figure 26. Shows the machine arm configured for use
with a computer monitor.
Figure 25. Machine arm configured for tool tray.
Figure 26. The machine arm configured for use
with a monitor.
Figure 24. Machine arm mounted to column.
