Attaching the Splash Guard
32352 Rev 1
11
Tormach® PCNC 1100 Deluxe Stand
8
Attaching the Splash Guard
The table mounted splash guard is shown installed
on the mill table in Figure 22. First remove the
cap screws at the corners of the top of the mill
table.
Referring to Figure 23 Insert the Left Side Plate(1)
and Right Side Plate (3) inside the Connecting
Plate (2) and then fasten with the Screws (4) (M5 x
12).
Place the splash guard on Mill Table (6), and then,
fasten it at 4 places with the Screws (5) (M6 x 12)
as shown in Figure 24. Finally slide the clear
front view screen into the slots on the front of the
guard as shown in Figure 22.
Figure 22. Table mounted splash guard.
Figure 23. Table mounted splash guard parts.
Figure 24. Mounting guard to table.
