Torklift C4204, Важные инструкции по установке для владельцев-операторов

Страница: 13 / 15

13
TORKLIFT’S BOLT FISHING GUIDE
Your guide to understanding the installation of our frame mounted tie downs.
Note: The hardware may vary as to
-Coiled End of Bolt Fisher-
what is being fished along with the
bolt. In this instance a 1” X 2” plate
washer is being fished along with the
hex bolt. Different applications may
require fishing through various star
washers and flat washers for example.
Desired Hole on Vehicle (Place the coiled
end of the bolt fisher through this hole).
This side of the Bolt Fisher should come
out of a hole where the required hardware
(for example 1” X 2” plate washer) can pass
through.
This bottom example shows the bolt when it’s completely fished through the
vehicle. You may find it easier to keep the bolt fisher attached until you get the tie
down receiver in place so that the bolt doesn’t fall into the vehicle frame.