Torklift A8002, Руководство пользователя

Страница: 6 / 24

Page1
Installation of GlowStep Revolution
Step 1
Begin by removing the factory steps, and leveling the trailer on flat
ground.
Step 2
Determine the proper mounting height of the GlowStep Revolution
Frame. The top of the GlowStep Revolution Frame should sit as close
to the optimal mounting height as possible to allow for the most
adjustability when installed.
Refer to table 2.1 for the optimal mounting height as measured from
the ground to the top of the GlowStep Revolution Frame when the
trailer is leveled on flat ground.
Part Number Mounting Height (inches)/(cm)
A8002, A8102 20.25 / 51.4
A8003, A8103 27.75 / 70.5
A8004, A8104 35.25 / 89.5
A8005, A8105 42.75 / 108.5
A8006, A8106 50.25 / 127.6
Table 2.1
Warning:
Do not use or apply weight to the GlowStep Revolution steps
while in the stored position. Doing so may cause damage to
the guide studs.
The 1/4" x 1-3/8" Bail Pin
MUST be installed when the steps
are either deployed or in a stowed position. Failure to use bail
pin can result steps not being locked in a secured position.
See figure 6.3 and 6.4