Torklift A8002, Руководство пользователя

Страница: 16 / 24

Page11
Step 7: GlowStep Revolution Hinge Tension
Adjustment
Your GlowStep Revolution Steps come from the factory preset to a
specific torque setting. This can be adjusted to suit your personal
preference for ease of use if needed. The Hinge Tension Adjustment
bolts are circled in
Figure 7.1 . In order to tighten or loosen the steps
simply take two 7/16” wrenches and locate two outside bolts in-
between each of the steps. Turn the bolts in increments of 1/32-1/16
turns at a time starting at the top then alternating to the other
suggested bolts until complete.
Caution: Do not over tighten any one bolt as this causes accelerated
wear. When your step is set to your liking, it should begin to slowly
open when disengaged from the frame. If it opens and contacts the
ground without assistance the steps are too loose.
Figure 7.1