Torklift A8002, Руководство пользователя

Страница: 18 / 24

Page13
Step 9: Service Bulletin
“Front to Back Step Cage Adjustment”
When installing the GlowStep Revolution you will notice the
hardware hole locations on the side of the step cage are slotted for
5/8" adjustability as seen in the photo below. All other steps (Not
including the GlowStep Revolution) require the step to be pushed all
the way back up against the trailers frame for additional support since
the steps do not contact the ground. With the Earth to RV design of
the GlowStep Revolution there is no need to install the step against
the frame of the RV but rather pull it out towards the RV’s side wall
so it is flush with the outer face of the side of the RV. This is the
proper installation location to provide adequate space for the safety
release level pin.