Step 1
Align the outer holes in the
Mounting Bracket
with the holes in
the
Generator Tray
. For this installation, the tube on the
Mounting Bracket
should be facing toward one of the longer sides
of the generator tray.
From the top of the tray, install one
3/8”-16 x 1-1/4” SS Hex Bolt
with one
3/8” SS SAE Flat Washer
into one of the holes as well as
one diagonal from the bolt you have just installed. Install a
3/8”-
16 x 1.25” SS Snake Eye Bolt
using the supplied bit
with a
3/8” SS
SAE Flat Washer
into the two remaining holes.
Secure the
bottom of each bolt with one
3/8” SS SAE Flat Washer
and one
3/8”-16 Grade 8 Nylock Nut
. See
Figure 1.1.
When Complete,
proceed to
step 4.
Figure 1.1
3/8”-16 x 1-1/4”
SS Hex Bolt
3/8” SS SAE
Flat Washer
3/8”-16 Grade
8 Nylock Nut
3/8” SS SAE
Flat Washer
3/8”-16 x 1.25” SS
Snake Eye Bolt
3/8”-16 x 1.25” SS
Snake Eye Bolt
