5
Step 3:
The two 2” holes in the front/back panel of the
Power Armor Max Battery
Box
are used to allow the battery cables to enter the battery box. They can
be mounted to either the front or rear of the trailer as long as there is
sufficient room to open and remove the
Power Armor Max Lid
.
Place the
Power Armor Max Battery Box
where it is to be mounted. If the
battery box is being installed on an open frame trailer, drill three ¼” holes
per side through the bottom of the battery box and into the trailer. Secure
the battery box as seen in figure 3.1
1/4"-20 x 1” SS Hex Bolt
1/4" SS SAE Flat Washer
1/4" SS SAE Flat Washer
1/4" Lock Washer
1/4"-20 SS Hex Nut
Figure 3.1
