7
Step 5:
If desired, a
Two Piece Divider
can be installed into the battery box. To
install the
Two Piece Divider
, place the tabbed end of one of the
Two Piece
Divider Halves
into the slots in the side of the battery box. Use the other
Two Piece Divider Half
to tab into the opposite side of the box. Bolt the
two divider halves together using the supplied
1/4"-20 x 3/4" SS Carriage
Bolts
and
1/4"-20 SS Wing Nuts
. The wing nuts should be on the opposite
side of the divider from the batteries to avoid abrasion. See figure 5.1
Figure 5.1
1/4"-20 x 3/4" SS Carriage
Bolts
1/4"-20 Wing Nuts
