Figure 33:
Factory settings screen
Figure 32:
Warning screen
The warnings on the warning screen are listed below.
CONNECTION ERROR:
When the Internet connection is lost,
HIGH TEMPERATURE:
If the actuator temperature is above the set value,
LOW TEMPERATURE:
If the actuator temperature is below the set value,
P1 PRESSURE LEAK:
When the opening air pressure drops,
P2 PRESSURE LEAK:
When the closing air pressure drops,
CLOSE TIME OVER
:
If the closing time is longer than the setting closing time,
OPEN TIME OVER
:
If the opening time is longer than the set opening time,
PST TEST FAIL:
If any error is encountered when performing a partial stroke test,
CARE WARNING
:
Before the malfunction occurred, but high possibility to occur malfunction
SERVICE REQUIRED:
Starts warning when exceed specified number of on/off or when general maintenance is required at specified
periods
k. Factory Settings
When return to factory settings, all settings other than Counter 1 are assigned the initial value. Password must be entered correctly
to return to factory settings.
SMS-TORK Endüstriyel Otomasyon Ürünleri San. Tic. Ltd. Şti.
16
valve & automation
