Figure 15:
LANGUAGE tab
Figure 16:
Language selection screen
Figure 17:
Monitoring Screen
Id:
The Device ID is located in the upper left corner of the monitoring screen. The device ID is initially set to 1234. The device ID is the
identity of the device. On the web application control is provide over the Device ID. Device ID can be changed by entering password
from settings tab.
Bgl.:
The connection information is located in the upper right corner of the monitoring screen. When the device is connected to the
internet,
ONLINE
will display,
OFFLINE
when the connection is lost. If there is no connection, the device is in a position that
cannot make GSM connection or there may be a problem with the connection of the GSM antenna.
S1:
Counter 1 shows, how many times the device has switched on and off from the first time it is used. It cannot be reset.
S2:
Counter 2 shows, how many times the device has switched on after it has been reset. A reset can be made in the settings menu.
P1:
Indicates air pressure in device’s port A.
P2:
Indicates air pressure in device’s port B.
Displays the position of the valve in
OPEN, CLOSE or HALF
.
Show actuator’s temperature value at
0
C.
Shows actuators onand off time at
second
(
sec
) and
milisecond
(
msec
)
c. Monitoring Screen
The monitor screen is continuously active. If no button is pressed for 5 seconds in any menu, the screen is switched to this. From this
screen, you can switch to the main menu screen and operate on other menus. You need to press the MENU button for 3 seconds to
exit the monitoring screen.
www.smstork.com
11
valve & automation
