Torishima Pump MMO, Руководство по эксплуатации

Страница: 2 / 16

0. General
0. 1. Before Starting Initial Operation
If installed properly and operated correctly, the pump can perform its specific performance in satisfactory
condition throughout a long term. Before putting the pump into initial operation, carefully read this Instruction Manual to
handle, operate, and maintain the pump properly. Keep this Manual all the times where operator or maintenance
personnel can have access to it easily for study any time when required.
All the pump parts and components are so manufactured under severe quality control that they can fulfil their
functions to entire satisfaction. But any fault or trouble attributed to one of the causes described below shall be out of our
guaranty.
(1) The ordered pump is used to handle the liquid of a different nature, density, temperature, or others than
those clearly specified in the order specification, or operates outside the operating range specified therein.
(2) Pump damage is caused as a result improper handling and operation, faulty installation, the use of
unsuitable material, faulty or unskilled piping, etc.
(3) Pump damage is caused by natural disaster.
When repair is required, it is recommended to repair the pump by our skilled serviceman as far as possible
or to return it to our factory.
0.2 Quality Control Plan ( QTC )
All inspection and test for material, dimension, performance, etc. are performed in the manufacturing process in
accordance with Quality Control Plan ( QTC ) submitted to the purchaser when the pump was ordered. Only pumps that
have fully satisfied the specified performance values upon inspection and test are allowed for shipment.
0.3 Name Plate
Any pump is provided with a nameplate. Please inform us of the followings when ordering spare parts and
replacement parts.
(1) Pump type, Mfg. No. ( Indicated in KH or KP ), date of production, etc. ( identified on the name plate ) .
(2) Parts name, material, quantity, etc. described in Sectional Drawing and Spare Parts List.
0.4 Handling
When handling the pump directly coupled with the driver, hook a lifting rope on the pump and its driver as
illustrated below.
( Absolutely avoid to hook a lifting rope on the eye bolt of the driver ) .
Fig. 1