manualshive.com logo in svg

TORCHVIEW CDVR-1608CDRW, Руководство пользователя, Страница: 3 / 49

Поделиться
Скачать
TORCHVIEW CDVR-1608CDRW Скачать руководство пользователя страница 3

 

 
 

 
1. Read Instructions 

   All the safety and operating instructions should be read before the product is operated. 

2. Retain Instruction Manuals 

   The safety and operating instructions should be retained for future reference. 

3. Heed Warnings  

All warnings on the product and in the operating instructions should be adhered to.   

4. Follow Instructions  

All operating and use instructions should be followed. 

5. Cleaning 

Unplug this product from the wall outlet before cleaning. 
Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 

6. Attachments  

Do not use attachments not recommended by the product manufacturer as they may cause hazards. 

7. Water and Moisture 

Do no use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet 
basement; or near a swimming pool; and the like. 

8. Accessories 

Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious 
injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table 
recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the 
manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer. 

 

9. Ventilation 

Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and 
to protect it from overheating, and these openings must not be blocked or covered. The openings should never be 
blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a 
built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s 
instructions have been adhered to. 

10. Power Sources 

This product should be operated only from the type of power source indicated on the marking label. If you are not 
sure of the type of power supply to your home, consult your product dealer or local power company. For products 
intended to operate from battery power, or other sources, refer to the operating instructions. 

11. Grounding or Polarization 

This product may be equipped with a polarized alternating-current line plug(a plug having one blade wider than 
the other). 
This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug 
fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your 
obsolete outlet. 
Do not defeat the safety purpose of the polarized plug. 

* Alternate Warnings 

This product is equipped with a three-wire grounding-type plug, a plug having a third(grounding) pin. This plug 
will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the 
outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-
type plug. 
 
 

I

MPORTANT SAFETY INSTRUCTIONS

 

Содержание CDVR-1608CDRW


















































Отзывы:

Нет отзывов