CATEGORY
DEFAULT
VALUE
FUNCTION & OPERATION METHOD
USE NOT
USE
•
Select whether e-mail server Login is required when sending an
event e-mail.
Click on the [USE] [Not USE] button to select between USE or
NOT USE.
E-MAIL SERVER ID
ADMIN
•
Set the E-mail Server ID.
•
Max. 16 characters can be used.
Use the pop-up Key Panel to input characters
PASSWORD 0000
•
Set the E-mail Server Password.
•
Max. 16 characters can be used.
Use the pop-up Key Panel to input characters.
E-MAIL SENDER
•
Set the e-mail address of the Sender.
•
Max. 50 characters can be used.
Use the pop-up Key Panel to input characters.
E-MAIL RECEIVER
•
Set the e-mail address of the Receiver.
•
Max. 50 characters can be used.
Use the pop-up Key Panel to input characters.
PPPOE ID
ADMIN
•
Set the ID required for PPPOE networking.
•
Max. 128 characters can be used.
Use the pop-up Key Panel to input characters.
PPPOE PASSWORD
0000
•
Set the Password required for PPPOE networking.
•
Max. 128 characters can be used.
Use the pop-up Key Panel to input characters.
DVR NAME
•
Assign a Name for the DVR.
•
Max. 50 characters can be used.
Use the pop-up Key Panel to input characters.
EVENT MAIL
•
Set for which Events e-mail notification is to be activated.
•
When an Event (Power, Sensor, Record, Camera, Network,
Backup, Setup, Time) occurs, e-mail notice will be relayed to the
designated recipient.
Click the Event buttons for which e-mail notification is required.
Selected events will be highlighted in pink.
Configuration
