Toradex Verdin Development Board, Руководство пользователя

Страница: 3 / 19

Verdin Development Board Errata
Toradex AG lEbenaustrasse 10 l 6048 Horw l Switzerland l +41 41 500 48 00 l www.toradex.com l support@toradex.com
Page 3 | 19
`
Overview
Errata #1: HAR-3274
– Inconsistency concerning the position of general-purpose LEDs and the
order of related signals on connector X38 ............................................................................ 4
Errata #2: HAR-3252
– SDIO evaluation kits failing when used in HS400 mode ................................. 5
Errata #3: HAR-3379
– Missing a pull-up resistor on the WAKE1_MICO# signal ................................ 6
Errata #4: HAR-3935
– CTRL_FORCE_OFF_MOCI# is pulled-up to wrong voltage rail ..................... 7
Errata #5: HAR-6600
– Ethernet PHY address strapping resistor for configuring PHYAD2 missing .... 9
Errata #6: HAR-7206
– Series capacitor values are too small for the audio codec's speaker output to
be used in a stereo setup ................................................................................................... 10
Errata #7: HAR-8016
– CSI_1_MCLK Voltage Level is not 3.3V ........................................................ 12
Errata #8: HAR-8290
– The LED status signals of the on-module Ethernet PHY are swapped ......... 13
Errata #9: HAR-8342
– Stitching Capacitors Influence Verdin iMX8M Plus Bluetooth Config
Strapping ............................................................................................................................. 14
Errata #10: HAR-8426
– Signal distortion on the audio codec's "Line In" input .................................... 16
Errata #11: HAR-8833
– The carrier board turns off or resets when a cable is connected to the USB-C
FTDI debug connector ........................................................................................................ 17