Outdoor Dome Series | Quick Guide
9
2.2.2 Disassembling the Camera
Please refer to the steps with figure below for correct disassembling order.
1.
Loosen the 3 camera housing screws (1).
2.
Gently set the camera housing (2) aside.
3.
Further loosen the 3 camera lens base screws (3).
4.
Gently lift the camera bottom case (4) off from the lens base (5).
Figure 2 - 1: Disassembling The Camera
2.2.3 Connecting the wires
After disassembling, the I/O connectors will be seen on the rear of the lens base.
Connect the power cable to the power plugs with one of the following options.
Insert power cable for AC 24V, Connect 24 V (~) cables to terminals ~AC 24V
PoE (IEEE 802.3af Class 0): Connect the RJ-45 jack to a PoE compatible network device that
supplied power with networking capability through the Ethernet cable.
Insert audio cable and alarm cable to the corresponding connectors of the unit if required.
1
2
5
3
4
1
2
5
3
4
A101DORV / A301DORV
A301DORZ / A501DORZ
