Mini Dome Series | User Manual
30
URL
Input a preferred name for representing each RTSP Stream URL. Please note that there
’re 2 transferring
types of each stream: Unicast and Multicast, and the URL name for each will be as the examples below:
Unicast: stream1
Multicast: stream1m
Multicast Address
The IP address for multicasting ought to be from 224.0.1.1 to 239.255.255.254. The RTSP URLs for
RTSP Stream 1, RTSP Stream 2, and RTSP Stream3 are as following respectively:
rtsp://(ip address)/(stream 1)
rtsp://(ip address)/(stream 2)
rtsp://(ip address)/(stream 3)
For example: rtsp://224.0.1.1/stream1
Audio Multicast Address
Similar to the above, IP address of audio multicast, responsible for audio transmitting, should be defined
from 224.0.1.1 to 239.255.255.254 as well.
Note
Please click “Save” button to save your settings. Users can also click “Reset to Default” to set
all the settings back to the factory defaults.
SNMP
SNMP (Simple Network Management Protocol) is an Internet standard protocol on top of application layer that
restructures the exchange of management information among network-attached nodes, which helps
administrators to remotely manage network devices and master network problems with ease.
SNMP V1
Tick
“ON” or “OFF” to enable or disable.
SNMP V2
Tick
“ON” or “OFF” to enable or disable.
SNMP V3
Tick
“ON” or “OFF” to enable or disable. Enter password corresponding to User Name. SNMPv3 provided
more security features than SNMP V1/SNMP V2.
Read/Write Community String
Enter the names of Read Community String and Write Community String.
Trap
Trap under SNMP allows an agent to notify the management station of significant events by way of an
unsolicited SNMP message, the asynchronous notification. Tick
“ON” or “OFF” to enable or disable trap
function here. Input IP address of Trap Host.
Heartbeat
To ensure a network free from delayed message, Heartbeat, this communications protocol sends back a
message in a given interval to properly confirm message is alive and in fact with a periodic heartbeat.
