Mini Dome Series | User Manual
29
increasing the security capabilities of SSL/TLS on standard HTTP communications. By default, it
’s
recommended to adopt 443 as the initial port number. Nevertheless, please also contact your system
administrator for other port number ranging from 1025 to 65535 if required.
IPv4 Address Configure
To set your IP address with further settings under IPv4 here.
DHCP: If enabled, the unit will automatically obtain an available dynamic IP address from the DHCP
server each time it connects to the LAN.
IPv4 Address: To manually set an IP address under IPv4.
Subnet Mask: Please use default address: 255.255.255.0. If subnet mask is not properly configured,
the unit may not be able to communicate with other devices.
Default Gateway: Leave blank as default setting. No Default Gateway address required if not used.
Ask your network administrator for further information.
Primary DNS: Same as the above.
Secondary DNS: Same as the above.
UPnP
When UPnP (Universal Plug & Play) is
set to “ON”, the unit can be detected automatically by any
computer in the LAN to skip the installation of the IP Finder utility.
OSD
“Camera Name” and “Date & Time” can be set ON to show on screen separately.
RTSP
To enable RTSP, simply enter the Login ID, Password and Port (554 by default) with selecting
“ON” in Authentication.
Figure 3 - 26: RTSP Settings
