TK210 GPS Car Alarm Website:
http://www.GPScaralarm.com
User Manual
Page
7
Restore the Stopped Car to Normal Status
SMS command:
111111RES
This instruction is used to restore the car to normal status after stopping the
car.
It is also used to stop the receiving of SOS alert SMS once the anti-robbery
SOS switch is pressed down.
Monitor the Voice around the Car
SMS command:
111111MON
This instruction is used to monitor the voice around the car.
After sending out this SMS, the tracker will call back immediately, then, user
can monitor the voice around the car upon picking up the call.
Two-way Talking with the Car
SMS command:
111111MON:Tel
This instruction is used to program the phone number which is used for
carrying out direct monitoring or talking.
User uses this phone number to call the tracker, it will be connected
automatically without driver
’
s permission. By this way, user can monitor the voice
or talk with the driver freely.
Example: 111111MON:13922713571
Note: If the Tel is the same as the first alarm-received phone (111111*10
Mobile #1*20 Mobile #2*), then this telephone can only be used to carry out
direct monitoring, it can not realize the function arm/disarm by calling any more.
Set up Movement Alert
111111MOV1
to enable the movement alert, the present location is the
center.
111111MOV0
to disable the movement alert
111111MOV
？
to check the setting of movement alert
If user sends 111111MOV1 to activate the movement alert function, every
time when the system is armed, if the car moves away from the present
TO
P
TEN
