Topsun HCS128, Руководство пользователя

Страница: 18 / 36

Original Instructions
17
9. When firing occur, press the throttle trigger to
allow the choke return to the running position and
pull the starter handle again to start the engine.
10. Pull up the front handle guard toward the
front handle to release brake. Then, allow the
engine to warm up with the trigger pulled slightly.
Before you start the engine, make sure the saw
chain is not contacting anything. Make sure the
chain brake always is activated before each
starting.
■
CHECKING OIL SUPPLY
After starting the engine, run the chain at medium
speed and see if chain oil is scattered off as shown
in the figure.
Chain oil
The oil tank should become nearly empty by the
time fuel is used up. Be sure to refill the oil tank
every time when refueling the saw.
■
CHECKING FUNCTIONAL OF THE CLUTCH
Before each use, you shall confirm that there is no chain movement when the chain saw
running at idling speed.
When running, the machine must always be firmly held in both hands, with the left hand
on the front hand-grip and the right hand on the rear hand grip, even if the operator is
left-handed.
6.
Operation