Topsun HCS128, Руководство пользователя

Страница: 13 / 36

Original Instructions
12
4.
Installing guide bar and saw chain
A standard saw unit package contains the items as
shown below.
：
(1) Power unit
(2) Saw chain
(3) Guide bar
(4) Guide bar scabbard
(5) Plug wrench
(6) File
Open the box and install the guide bar and the
saw chain on the power unit as follows.
The saw chain has very
sharp edges. Use protective gloves for safety.
1.
Pull the guard towards the front handle to
check that the chain brake is not on.
`
2. Loosen nuts, then remove the clutch cover (2)
and the spacer (1).
3. Gear the chain to the sprocket and, while fitting
the saw chain around the guide bar, mount the
guide bar to the power unit. Make sure the pin (4)
on the clutch cover has inserted in the hole (6) on
the engine base. Fit the chain tensioner nut (3)
into the lower hole (5) of the guide bar, then
install the clutch cover, and fasten the mounting
nut to finger tightness.