background image

Do not wear metallic rings, watchbands, ear, nose, lip rings or other metallic objects 

Abide to the safety regulations for all other system components, including wires and cables, connectors, charging 

regulators, inverters, storage batteries, rechargeable batteries, etc. 

Only use connectors to connect modules to form a string, or connect to another device. Removing the connectors 

will lead to the warranty becoming void. 

Contact with electrically changed parts of the panels, such as terminals, can result in burns, sparks and lethal shock 

whether or not the panel is connected. 

Do not touch the PV module unnecessarily during installation. The glass surface and the frame may be hot; there is a 

risk of burns and electric shock. 

Avoid exposing cables to direct sunlight in order to prevent their degradation. 

Keep children well away from the system while transporting and installing mechanical and electrical components. 

FireSafety

Consult your local authority for guidelines and requirements for building or structural fire safety. 

Roof constructions and installations may affect the fire safety of a building; improper installation may create hazards 

in the event of a fire. 

The modules have been rated Fire Class C, and are suitable for mounting onto a Class A roof. A fire-resistant-covering 

roof rated for such an installation is required for rooftops applications. 

It may be necessary to use components such as earth ground fault circuit breakers, fuses and circuit breakers. 

 

3

Содержание TPSM5U



















Отзывы: