8
4:4 Take the halyard through the Spinlock Cleat that is
mounted on top of the crossbeam.
4:5 Take the halyard back through the pulley on the line (at-
tached under the thwart) next to the back of the centreboard.
4:1 Tie one end of the gennaker halyard around
the front furler bar.
4:2 Take the other free end of the halyard and feed it through
the pulley on the front of the crossbeam.
4:3 Take the free end of the halyard through the pulley that is
underneath the gennaker chute. The chute may need to be
moved to one side for the pulley to be exposed.
Rigging Instructions - RIGGING THE GENNAKER KIT
