TK604 user manual
32
"
Protocol type
”: the selection of the type of protocol supported by the ball machine, and press the [OK] key to
enter the modification.
“
Address code
”: select the address code of the ball machine and enter the modification according to the digital key.
"
Preset position
”: select the preset bit code of the ball machine and enter the modification according to the digital
key.
4.8 System information
The system information is shown in 2 pages, which shows the state of the device, disk information and
network information. In addition to menu calls, you can also use the INFO key directly in the preview screen.
Pay attention to:
Installing a number of devices and each device is set at the same time, please use the configuration of import
and export, namely setting up a device, export the configuration file, and then imported into the other devices
can be realized each device configuration is the same
。
。
。
。
