TK604 user manual
31
"
alarm linkage
”:
OFF / Output 1 /Output 2, press the [Enter] key to select.
When the "
alarm linkage
" detects that the duration of the abnormal voltage exceeds the set duration, the
corresponding action of the trigger voltage is triggered.
Set the appropriate offer voltage parameters, outdated equipment when the battery voltage automatic shutdown,
can effectively protect the car battery discharge, avoid vehicles could not be started because the battery voltage is
too low, and can prolong the service life of the battery.
4.7.6
Serial port Settings
The serial port parameter setting of serial port extension device can be used for external LED advertisement
screen, TTS speech module, oil meter, g-sensor external SENSOR, card reader, etc
"
External
”: the selection of the device type of the serial port, press [OK] key to enter the modification.
"
Baud rate
”: select the baud rate of the serial port of the external device, and press [OK] key to enter the
modification.
"
Data bits
”: select the data bits of the external device serial port, and press [OK] key to enter the modification.
"
Stop bit
”: select the stop position of serial port of serial port, press [OK] key to enter the modification.
"
Check bit
”: select the test bit of the serial port of the external device, and press [OK] key to enter the modification.
4.7.7
PTZ Setup
The cloud control is used to control the parameters of the control cloud billiard machine
