TK604 user manual
30
4.7.4
Video detecting
This menu sets the degree of change of image in video and related alarm linkage
"
Threshold value
”: sets the threshold value that triggers the motion detection
"
Sensitivity
”: 0-7 optional, level 0 is the lowest level, level 7 is the highest level. The default setting is level 1, the
higher the level, the lower the sensitivity and the low sensitivity will not trigger the alarm.
In order to achieve the best results, you need to set the appropriate parameters according to the actual environment.
4.7.5
Voltage alarm
Set voltage alarm correlation parameters and alarm linkage
"
Low voltage
" means that the current input voltage is below the set voltage threshold, "above" means that the
current input voltage is above the current set voltage threshold.
"
Enable
”:
ON/OFF, press [Enter] key to select.
"
Limit
”:
Range alarm value. Minimum voltage and maximum voltage press Enter.
"
Wait
”:
Image stabilization level