- 13 -
I. REPLACING THE DIAMOND BLADE
WARNING! Disconnect the power supply before installing or making adjustments
to the diamond blade.
●
CHOICE OF THE DIAMOND BLADE
Only use diamond blade with diameter of 200mm, the bore
of the blade must be 22.23mm.
●
REPLACING THE DIAMOND BLADE
1. First,
loose the knob to open the blade guard.
Fig.23
Fig.24
2. Ensure
that the shaft and flanges are clean and re-fit the blade in the opposite manner.
Directional arrows on blade MUST line up with directional arrow on blade guard, so that material
to be cut is against the direction of rotation.
3. Replace
the flange back, and adjust the blade to get the best balance of Blade.
4. Fix
the lock nut tightly.
5. Close
the blade guard and secure the knob.
VI MAINTENANCE
CAUTION!
While maintaining and cleaning the machine pull the plug from the mains socket. Never use
water or other aggressive liquids while cleaning electrical parts of the machine.
●
Periodic maintenance of the saw will prevent unnecessary problems. Keep the ventilation slots of
the stone cutter clean to prevent overheating of the motor.
●
Dry the saw as much as possible after using.
A. PUMP MAINTENANCE
Fig.25A
Fig.25B-Remove the
connection box cover
Fig.25C-Loose and pull
out the terminal
