TopLite Merlin-C10, Инструкция по эксплуатации, обслуживанию и устранению неисправностей, Страница: 7 / 17

Pan/Tilt Inversion Modes
This section of the menu allows you to “invert” the pan and tilt function of your Merlin-C10. This is handy
when trying to program or operate a unit that has been hung ”upside-down” from a pipe or truss.
Pan Inversion Mode
To enter the “pan” mode section of your Merlin-C10, press the “ ” key and scroll through the menu
using the “ ” or “ ” keys until the display reads: “ ”. Press the “ ” key and then scroll through
the two choices using the “ ” or “ ” keys until you have found the mode you wish to use and press the
“ ” to choose it:
“Standard” Display reads: “ ”
This is the factory default setting, the unit responds normally.
“Inverted” Display reads: “ ”
Movement on the Pan or “X”-axis will be reversed to any control inputs (Left is right, right is left, etc.)
Tilt Inversion Mode
To enter the “tilt invert” mode section of your Merlin-C10, press the “ ” key and scroll through the
menu using the “ ” or “ ” keys until the display reads:
“
.” Press the “ ” key and then scroll
through the two choices using the “ ” or “ ” keys until you have found the mode you wish to use and
press the “ ” to choose it:
“Standard” Display reads: “ ”
This is the factory default setting, the unit responds normally.
“Inverted” Display reads: “ ”
Movement on the Tilt or “Y”-axis will be reversed to any control inputs (Left is right, right is left, etc.)
Display Inversion Mode
To enter the “Display” mode section of your Merlin-C10, press the “ ” key and scroll through the
menu using the “ ” or “ ” keys until the display reads: “ ” . Press the “ ” key and then
scroll through the two choices using the “ ” or “ ” keys until you have found the mode you wish to use
and press the “ ” to choose it:
“Standard” Display reads: “ ”
This is the factory default setting, the display reads normally.
“Inverted” Display reads: “ ”
This will invert the display for easier reading/operation when the unit is hung upside-down
To enter the “NO Display” mode section of your Merlin-C10, press the “ ” key and scroll through the
menu using the “ ” or “ ” keys until the display reads: “ ” . Press the “ ” key and then
scroll through the two choices using the “ ” or “ ” keys until you have found the mode you wish to use
12
and press the “ ” to choose it:
“Standard” Display reads: “ ”
This is the factory default setting, the display reads normally.
“Inverted” Display reads: “ ”
This will close the display for after six second before you press any key.
Manual Reset Mode
To enter the “Manual Reset” mode section of your Merlin-C10, press the “ ” key and scroll through
the menu using the “ ” or “ ” keys until the display reads: “ ” . Press the “ ” to choose it:
“Reset” Display reads: “ ”or “ ”
This is the factory default reset setting, the unit will automatically Home/Reset all of its parameters
( including its DMX address) .
This is an “end-all” function for an instrument that has failed to respond to all other tests. If you simply
wish to test or reset a particular function on the unit, use the test function mode or use the reset in the
DMX channel number 9.