GTM1 User manual V-2020-08-12
12 |
E N
4
Installation
This Installation & Programming manual provides the basic installation, wiring and programming information required to program the module Progate
and connect all third party devices to the module.
Disconnect power supply before wiring!
The correct wiring procedure is as follows:
Make sure power is turned off;
Make wiring connections to the terminals;
Apply power.
4.1
Power supply, Battery Wiring
Power supply DC 10-30V AC 12-24V Max 0.2A. It is necessary to calculate max current of power supply. The current of the alarm system is the current
used by sensors, relays, siren and other devices. It is most convenient to use power supply source applied for power supply of security systems with the
option to connect backup lead battery. It is recommended to mount remote control relays into sockets. Sockets may be easily f ixed in metal box. It is
necessary to select relays according to preferred voltage and current.
Prepare the module GTM1
•
Insert SIM card
•
Screw GSM antenna
The example how to configure the module GTM1 for AC failure, restore function
How to configure the module GTM1 for AC failure, restore function
If you want to edit existing configuration, You have to read i
t (press “Read” in the command line)
Edit settings,
Write edited configuration (press “Write” in the command line)
Figure 17 Power supply, battery wiring
