Topfield TF 5200 PVRc, Руководство пользователя

Страница: 23 / 164

3.2 Video and audio settings 17
3.2.1 Televsion standard
The digital receiver supports two types of television standard.
One is PAL (Phase Alternating Line) standard, and the other
is NTSC (National Television Standards Commitee) standard.
PAL was adopted in European countries while NTSC is adopted
in USA, Canada, Mexico and so forth.
If you have a PAL televsion, you have to set the TV Type op-
tion to PAL . In this case, if a service you wish to watch is NTSC
standard, the digital receiver converts it into PAL standard for
your PAL television. However, its quality would somewhat
fall. The opposite case brings about the same result.
The best thing is to watch PAL services with a PAL television
and to watch NTSC services with a NTSC television. How-
ever, the auto television is able to process both of them. So if
you have an auto television, set the
TV Type
option to
Multi
.
With this option, the digital receiver will output them without
standard conversion. This setting is most recommended espe-
cially if you are not sure what stadard television you have.
3.2.2 Color model
The type of the socket that reads TV on the back panel of
the digital receiver is SCART. This is also known as Euro-
connector. Through this socket, the digital receiver is able to
output video signals of various color models: CVBS (Com-
posite Video Baseband Signal), S-Video (Super-Video), YUV
and RGB. Audio signals are also output together through this
socket.
If you have connected the digital receiver and your televsion
by this connector, you should set the
Video Output option to
your desired color model. If you have connected them by RCA
connector at which
VIDEO reads on the back panel of the dig-
ital receiver, you do not have to set this option because the
digital receiver outputs CVBS video through RCA connector