Topfield TF 5200 PVRc, Руководство пользователя

Страница: 18 / 164

12 Installation
Table 2.3: Connectors specification
TV SCART CVBS/S-Video/RGB/YUV video output
Left & right audio output
VCR SCART CVBS video output
Left & right audio output
CVBS/S-Video/RGB/YUV video input for bypass
Left & right audio input for bypass
S-Video S-Video output
RCA AV Composite video output
Left & right audio output
S/PDIF Dolby Digital audio output
RS-232 9 pin D-sub type
Transfer rate: 115.2 kbps at maximum
USB 2.0 Device
2.4 Connecting the digital receiver
There are several ways to install the digital receiver as de-
scribed below. Install the digital receiver suitably to your tele-
vision and other appliances. If you have any problem with
your installation or need a help, contact your dealer or service
provider.
You should configure audio and video settings after installa-
tion. For detailed descriptions about audio and video settings,
refer to § 3.2.
Connecting to the broadcasting cable
Connect the antenna cable to the CABLE 1 IN socket on the
digital receiver, and then connect the RF LOOP 1 OUT socket
and the CABLE 2 IN socket with a loop-through cable.
If you have another digital receiver, plug another cable into
the
RF LOOP 2 OUT socket on the digital receiver and the
corresponding socket on the other digital receiver.