4.1 Searching broadcasting services
33
1. Choose your desired satellite at the
Satellite Name
op-
tion.
2. Set the
Search Mode
option to
Manual
.
3. Choose your desired transponder at the
Frequency
op-
tion or enter it with the numeric buttons.
4. Enter the symbol rate of your desired transponder to the
Symbol Rate
option with the numeric buttons.
5. Set the
Polarization
option to the polarization of your
desired transponder.
6. If you set the
Network Search
option to
On
, the digital
receiver will check up the up-to-date channel information
as searching services, but it takes rather longer time.
NOTE
You may get transponder information from a satellite magazine
or website such as
http://www.satcodx.com
or
http://www.
lyngsat.com
.
Searching one service of a transponder
To search one service of a transponder, perform the following
steps:
1. Choose your desired satellite at the
Satellite Name
op-
tion.
2. Set the
Search Mode
option to
Advanced
.
3. Choose your desired transponder at the
Frequency
op-
tion or enter it with the numeric buttons.
4. Enter the symbol rate of your desired transponder to the
Symbol Rate
option with the numeric buttons.
5. Set the
Polarization
option to the polarization of your
desired transponder.
