Front Panel
button switches the digital receiver between standby mode and active mode.
CHANNEL
c
,
a
buttons switch to the previous or next service. They are also used to navigate
in menus and interactive screens.
light blinks every time you press a button on the remote control.
STANDBY
light lights up while the digital receiver is in standby mode.
Front display shows the current time in standby mode, and displays the current service in active
mode.
There is a USB port on the front panel for firmware update
and data transfer. (USB 2.0 Host 5 V DC, 500 mA) If you have
an external hard drive connected to the digital receiver via the
USB port, you can record television programmes into it.
NOTE
We recommend you to use a separate power supply for the external hard drive.
Remote Control
•
button switches the digital receiver between standby mode and active mode.
•
is used to set a sleep timer in 10 minute increments.
•
V
−
,
V
+
buttons decrease or increase the volume. They are also used to change values for
menu options.
•
mutes the sound. Press again to switch it back on.
•
P
−
,
P
+
buttons switch to the previous or next service. They are also used to navigate in
menus and interactive screens.
7