24
Preference Settings
device since the digital receiver is just a bypass for the video
recorder.
4.2.5 Audio mode
Basically, there are two audio sources as you can find two audio
sockets on the back panel of the digital receiver. You can enjoy
only one source or both of them in either stereo or mono. Set
the
Sound Mode
option as you desire.
Apart from this setting, you can change the sound mode with
the
button. See §
5.2.4
for a detailed description.
The digital receiver can output two types of digital audio sig-
nals via the S/PDIF output. One is an encoded signal, and
the other is a decoded signal. If you have the digital receiver
linked to your audio-video receiver via the S/PDIF output, you
have to set the
Digital Audio
option to
Off
, which means that the
digital receiver will output encoded Dolby Digital audio with-
out decoding so that your audio-video receiver can decode it.
Otherwise, set it to
On
, then the digital receiver will output
decoded Dolby Digital audio, scaling it down to two channels.
NOTE
Only if the service you are currently watching provides
a Dolby Digital audio track, you can enjoy Dolby Digital
sound.
If you feel that the audio from the S/PDIF output does not
synchronise with video, you can straighten it by adjusting the
value of the
S/PDIF AV Sync
option.
4.3
Local time setting
You should set your local time for timer events.
Содержание CRC-2400
Страница 6: ......
