Topfield CRC-2400, Руководство пользователя

Страница: 36 / 96

30 Preference Settings
4.7 Options for on-screen display
To set the options for the on-
screen display (OSD), select the
Settings
>
OSD
menu. You
should see a screen like the left
figure.
To adjust the transparency level of the OSD, set the
OSD Trans-
parency
option as you desire. Its available range is 0 to 50 per-
cent.
To adjust the display time of the information box, set the
Info
Box Display Time
option as you desire. Its available range is
1 to 30 seconds. If you set this option to
No Info Box
, the in-
formation box will not be displayed when you switch services.
However, pressing the
button will display the informa-
tion box. If you set this option to
Never Hide
, the informa-
tion box will always be displayed. For the information box, see
§
5.2.3 .
In addition, you can raise or lower the position of the infor-
mation box. Set the
Info Box Position
option as you desire. Its
available range is
−
10 to +3 lines. The higher you set the op-
tion, the lower the information box will be positioned.
To use an animation effect when changing menu, set the
Ani-
mation
option to
Enable
.
If any service’s name is too long to fit the width of the service
name column on the services list screen, you can get it to scroll
by setting the
Text Scroll
option to anything other than
Disable
.
With the choice of
Full Scroll
, it will be fully scrolled until its
end disappears; with the choice of
Part Scroll
, it will be scrolled