
Instructions for use:
Check shield technical condition prior to use, in particular:
– Outer glasses and welding filters should not be dirty, scratched or cracked. (Damage of glass and dirt
reduce visibility and increase risk of injuries.)
– Shield body is not damaged.
CAUTION!! The shield loses its protective properties in case of shield body damage or crack in
welding filter or protective glass. Damaged shield must not be used for welding works.
In case of damage, crack or excessive scratches of glass or filter replace with a new part. When the shield
loses its light tightness it has no protective properties and therefore must not be used for welding tasks.
Protective properties
Recommended protection levels (dark levels) for filters installed in welding shields are specified below,
depending on the welding method (based on PN-EN 169:2003)