Topcon UA-10 Series, Инструкция по эксплуатации

Страница: 7 / 534

5
Disclaimer
•
We are not responsible for the damages caused by various problems such as, fire, earthquake,
behaviors by other persons, other accidents, intentional or negligent or wrong use of the device by
the operator, and the use of the device under abnormal conditions.
•
We are not responsible for incidental damages arising from the use or unavailability of the device
(loss of business income, business interruption, etc.).
•
We are not responsible for the damages caused by the uses other than specified in the Instruction
Manual.
•
We are not responsible for the damages caused by the installation or execution of the software and
the malfunction of other software and PC.
•
We are not responsible for the damages caused by the malfunction due to the combination with the
connecting devices.
Precautions for Use
•
Use dedicated AC adapter, otherwise it may cause malfunction. For the power supply used for this
device, the input voltage is 100 to 240 VAC and the frequency is 50 to 60 Hz.
•
Never measure the light source exceeding the measurable range or the sunlight. Such behaviors
may damage the photo detector and make it impossible to perform the stabilized measurement.
•
Do not put the device on the place where it is difficult to operate the device.
•
Never use the device in such places as is dusty, humid, or corrosive gas generating.
•
Warm up the instrument for 5 minutes before measuring. When measuring luminance of 1cd/m
2
or
less by using UA-200, warm up the instrument for 30 minutes. Otherwise the instrument might
provide unreliable measured value.
•
Never use this device in a place where the temperature tends to vary rapidly. Although this device is
equipped with a temperature compensating circuit, it may not perform the stabilized measurement
under the environment where the temperature tends to vary rapidly.
•
Never use or store the device in such place as is subject to heavy shock like falling or as tends to
vibrate at any time. Such places may damage this device equipped with delicate optical
components. And, to carry the device, please use the carrying case not to directly vibrate or
shock it.
•
To store the device, be sure to put it in the carrying case and keep it under constant temperature
and humidity. Never store the device under high temperature and high humid environment such as
in a car.
•
To maintain the measurement precision, be sure to perform the calibration at least once a year. For
the calibration adjustment, consult the local retailer from which you purchased the device or
TOPCON TECHNOHOUSE CORPORATION.
•
To request the calibration adjustment, be sure to put the device in the carrying case and put the
case in a carton box with cushioning materials packed to send it to the retailer or us.
•
When the calibration is adjusted, the measurement data stored in the device are completely
removed. Therefore, be sure to back up the necessary data in your PC before requesting the
calibration.
•
Using this software together with other software may interrupt the communication with this device.
Therefore, it is better for you to execute this software as independently as possible.
•
Never install software other than commercially available software on the PC onto which this
software is installed. Such behavior may cause the malfunction.
•
When you use LAN cable other than standard accessory, use straight through Category 5e cable
(1000BASE-T/TX) or greater.
•
Be sure to save the data at the interval between respective measurements.
•
For energy saving, when the unit will not be used for an extended period of time, unplug the power
plug from the socket.
•
Keep the instrument away from water and liquid. This instrument is not water-resistant.
•
This device consists of recyclable material. Please contact recycling agent if you dispose of this device.