Topcon UA-10 Series, Инструкция по эксплуатации

Страница: 271 / 534

269
5.3 Standard Spot View Operation
In the Standard Spot View, the device can measure the target at the preset positions in
accordance with standards.
The preset standards comply with JEITA standard (EIAJ ED-2522/ED-2710) and other three
standards are preset by Topcon Technohouse. And, you can specify the pattern and the
number of the measurement spot.
The default standard is set to JEITA standard and the measurement spot size is set to 10 mm,
therefore change these settings according to the number of pixels of the measurement target.
(The JEITA standard requires you to measure an area of 500 or more pixels per the
measurement spot.)
In the JEITA standard measurement method, the vertical direction-based measurement is
specified. However, in the UA-10 measurement having an angle to the measurement spots,
therefore the measurement data by using the UA-10 and UA-200 are affected directivity
characteristics of the light emitted from the measurement target.
The following operations are performed according to the same steps. Refer to the respective
chapters indicated below.
Change Display Size
☞
“5.2.2 Change Display Size”
Change Display Color
☞
“5.2.3 Change Display Color”
Change Display Tristimulus values
☞
“5.2.4 Selecting items in Tristimulus values”
Save Snapshot
☞
“5.2.11 Save Snapshot”
Save Measurement Data in CSV File Format
☞
“5.2.12 Save Measurement Data in CSV File Format”