10. CONNECTING TO EXTERNAL DEVICES
42
Off:
Omit the
[ACK]
$
• Setting ’(3) and (4) are for an instrument using GTS commands.
2. Select a mode for the FX in the "
Bluetooth
" tab.
The factory setting is "Slave".
Register companion devices.
• "Master" cannot be selected when no
companion devices have been registered.
C
"Master"/"Slave": "
&
Bluetooth
connections"
3. Select, in "Link", a companion device from among
the
Bluetooth
devices already registered in the
FX.
C
Registering devices: "PROCEDURE
Registering
Bluetooth
companion devices"
• Companion devices cannot be selected when
the FX is set as "Slave".
4. Set "Authentication" to "Yes" or "No".
If "Authentication" is set to "Yes" for the FX the
passkey will also need to be input on the
companion device.
5. When "Authentication" is set to "Yes", input the
same passkey as that for the intended companion
device. Even if "Authentication" is set to "No", a
passkey is requested when authentication is set
on the companion device being used.
• Up to 16 numeral characters can be input. Input
characters will be displayed as asterisks (e.g.
"*****"). The passkey was set to "0123" at the
factory.
6. Press
[OK]
to finish settings.
